Cr10S Pro Enclosure

Cr10S Pro Enclosure. Would do it again in a heartbeat. Roughly 2kg of filament (i used pla) and about 150 hours of print time are needed. I bought a mdf plate for around 4€, went to the print shop and printed out my construction plan in din a0. I have to say, i put a bl touch on my cr10s pro and it is a night and day difference. It is designed for 1/8 wall panels.

Hier 27 94

I used hardboard for all but the front which is acrylic but acrylic could be used for all panels for a completely clear enclosure. This is an enclosure for printing in abs or other temperature sensitive materials. It is designed for 1/8 wall panels. I have to say, i put a bl touch on my cr10s pro and it is a night and day difference.

It is designed for 1/8 wall panels.

I used hardboard for all but the front which is acrylic but acrylic could be used for all panels for a completely clear enclosure. Since i did not like the airduct from the original enclosure project because it was a complicated print and didnt really address the airvents on the bottom of the printer (there wasnt even a base plate in the parts list), i designed my own. The enclosure is a 24 x 26… I used hardboard for all but the front which is acrylic but acrylic could be used for all panels for a completely clear enclosure. I bought a mdf plate for around 4€, went to the print shop and printed out my construction plan in din a0. See the build guide pdf in the download package for complete material, printing. Roughly 2kg of filament (i used pla) and about 150 hours of print time are needed.

Since i did not like the airduct from the original enclosure project because it was a complicated print and didnt really address the airvents on the bottom of the printer (there wasnt even a base plate in the parts list), i designed my own. I used hardboard for all but the front which is acrylic but acrylic could be used for all panels for a completely clear enclosure. The enclosure is a 24 x 26… Roughly 2kg of filament (i used pla) and about 150 hours of print time are needed. Then i taped the construction plan onto the. Since i did not like the airduct from the original enclosure project because it was a complicated print and didnt really address the airvents on the bottom of the printer (there wasnt even a base plate in the parts list), i designed my own. See the build guide pdf in the download package for complete material, printing. Would do it again in a heartbeat.. Then i taped the construction plan onto the.